New Kleemann cone crusher celebrates global première at CTT in Moscow/RUS and at Hillhead in Buxton/ENG.
At almost the same time Kleemann presents its new mobile cone crusher in the Contractor class to the world. The new MOBICONE MCO 9 EVO celebrates its world première at CTT in Russia and at Hillhead in England. Kleemann also presented the new mobile jaw crusher MC 100 R at Resta in Lithuania.
The mobile cone crusher closes one of the final gaps in the Kleemann product range. The MOBICONE MCO 9 EVO is perfectly suited to the mobile jaw crusher MOBICAT MC 110 EVO, which made its world première at Bauma 2013 and can also be seen at the two trade fairs. The mobile jaw crusher MC 100 R EVO is also new and was presented to the public for the first time at RESTA in Vilnius/LTU at the end of April. The MC 100 R EVO is based on the MC 110 R EVO and complements the Kleemann product range in the area of mobile jaw crushers.
Powerful, efficient and easy to transport: Kleemann MCO 9 EVO
Like the other Kleemann crushers in the EVO range, the MCO 9 was developed especially for the needs of customers in the contractor market. Weighing approx. 30 tons, it is easy to transport and ready for operation quickly and simply with just a few movements. For example, the feeding unit can be adapted by a simple slide mechanism from transport to operating position. This slide mechanism enables the adaptation of the material discharge pattern to the crusher during operation. The feeding unit can thus always be optimally adjusted to the crushed material, thereby preventing wear on one side. Similar to the other Kleemann EVO models, the drive concept with crusher direct drive and electric drives of the conveyor belts also promises extremely efficient operation. And the new plant also doesn't lack in power, quite the contrary: With a performance-optimised crusher housing design, the 248 kW of the hydraulics is also optimally realised. A continuous drive power at the crusher of 160 kW is thus available. Together with its large stroke, the cone crusher not only makes possible crushing capacities of up to 250 t/h, but also achieves a higher crushing ratio and produces an end product with a higher fine content in comparison to other cone crushers in this class. In addition, the crusher can be optionally equipped with an anti-spin system, which prevents intrinsic spinning, and thus notably reduces the wear in this area. A magnet and metal detector are also available as options, which significantly increase the operational reliability.
Simple operation and optimal linkage options
The MCO 9 is equipped with the same touch panel control system that has already been tried and tested in the other EVO plants. If you are familiar with this touch panel control system, you will not need to learn a new system. If the plant is operated in conjunction with a mobile jaw crusher of type Mobicat MC 110 Z EVO, which has the same drive concept, this results in the best possibilities for electrical locking. For instance, the MCO 9 EVO and MC 110 Z EVO are designed to work perfectly with each other. Their different material conveying elements, such as the vibrating chute or grizzly, can be optimally adapted. This way it is guaranteed that the cone crusher always maintains the optimal filling level and a high-quality end product is produced.
MOBICAT MC 110 Z with effective preliminary screening
The MC 110 Z also excels with its crusher unit with a high raised crusher jaw, which avoids blockages in the crusher area and significantly improves the material feed properties, with its familiar efficient double-deck grizzly and with its very efficient consumption values. During operation the mobile plant combination of the two machines results in a high performance and at the same time a very economical result.
MC 100 R EVO complements the range of jaw crushers
The MC 100 R EVO was recently presented in Lithuania, the design of which is heavily based on the MC 110 R and its appearance is also very similar. It also impresses with its familiar diesel-direct-electric drive concept, which is already used in the other EVO plants. With the overall smaller system dimensions, the crusher inlet size is 950 x 550 mm, and a weight of approx. 30 tons, it is much easier to transport than the MC 110 R, which weighs 38.5 tons. Nevertheless, it manages feed capacities of up to 200 t/h and like the MC 110 R is available with options such as electromagnet or permanent magnet, extended side discharge or crusher discharge conveyors, Continuous Feed System (CFS) for permanent crusher loading or crusher deblocking system. It can also be optimally adapted to the needs of customers in the contractor market.
Phone +49 7161 206-0